Wear-Resistant Oil Press Accessories Screw Shaft Rods Cake Outlet of Ring Bearing

Product Details
Customization: Available
After-sales Service: 24X7 After Sales Service
Warranty: 3 Years for Main Structure
Still deciding? Get samples of US$ 400/Piece
Request Sample
Gold Member Since 2023

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

Importers and Exporters
The supplier has import and export rights
High Repeat Buyers Choice
More than 50% of buyers repeatedly choose the supplier
to see all verified strength labels (6)
  • Wear-Resistant Oil Press Accessories Screw Shaft Rods Cake Outlet of Ring Bearing
  • Wear-Resistant Oil Press Accessories Screw Shaft Rods Cake Outlet of Ring Bearing
  • Wear-Resistant Oil Press Accessories Screw Shaft Rods Cake Outlet of Ring Bearing
  • Wear-Resistant Oil Press Accessories Screw Shaft Rods Cake Outlet of Ring Bearing
  • Wear-Resistant Oil Press Accessories Screw Shaft Rods Cake Outlet of Ring Bearing
  • Wear-Resistant Oil Press Accessories Screw Shaft Rods Cake Outlet of Ring Bearing
Find Similar Products
  • Overview
  • Product Description
  • Detailed Photos
  • Operating instructions
  • Company Profile
  • Our Advantages
  • Why Choose Us
  • Frequently Asked Questions
Overview

Basic Info.

Model NO.
6YL ZX YZ YX
Press Series
First
Voltage
380V
Condition
New
Color
Custom Made
Advantage
Low Noise/High Power
Spare Parts
Worm/Ring/Bars
Lead Time
10-15days
Transport Package
Fumigated Wood Box
Specification
1000*550*950
Trademark
WINGLOBAL
Origin
Henan China
HS Code
8479200000
Production Capacity
10000/Year

Product Description

Product Description

We produce and supply spare parts for various popular oil presses on the market. It mainly includes 6YL, ZX and YZYX series. The key standard for oil press parts is hardness (HRC), the harder the press ring and worm, the better the wear resistance, so its service life will also be longer than the average life.

Our exclusive hardness is between 61-67HRC, the only secret is the tempering process. Our secondary tempering stamping parts are unmatched in the market for their superior performance.

If you are interested, please feel free to visit our factory and inspect the oil press parts in person!
 

Detailed Photos

Wear-Resistant Oil Press Accessories Screw Shaft Rods Cake Outlet of Ring Bearing

Wear-Resistant Oil Press Accessories Screw Shaft Rods Cake Outlet of Ring Bearing
 

Wear-Resistant Oil Press Accessories Screw Shaft Rods Cake Outlet of Ring Bearing

 

Wear-Resistant Oil Press Accessories Screw Shaft Rods Cake Outlet of Ring Bearing
Wear-Resistant Oil Press Accessories Screw Shaft Rods Cake Outlet of Ring Bearing


Wear-Resistant Oil Press Accessories Screw Shaft Rods Cake Outlet of Ring Bearing

 

Operating instructions

Wear-Resistant Oil Press Accessories Screw Shaft Rods Cake Outlet of Ring Bearing



Wear-Resistant Oil Press Accessories Screw Shaft Rods Cake Outlet of Ring Bearing

 

Wear-Resistant Oil Press Accessories Screw Shaft Rods Cake Outlet of Ring Bearing


Maintenance and Assembly/disassembly of Main parts

1 Assembly/disassembly of Main parts
1.1 Pressing cage (round plates, square rods holder)
      Rotate the screw shaft and remove it from the chamber. Loose the lock nut on the outlet end by rotating it counter-clock wise using a 24 mm diameter bar, loose  four M14bolts, remove ten M16 bolts which are used to connect upper and lower cases. However, after removing upper case, round plates and square rods holder can be pulled out.
1.2 Remove square rods:
      After removing the holder, tap the end of one rod and take it out, then others will be easily removed.
1.3 Assembly of rods:
      Erect the rod holder vertically and make its side with oil grooves locate downwards, better on a wooden plate, then put square rods  to touch holders inner wall circumferentially with their grooves downwards again. However, grooves of every two adjacent rods should not be touched. Then insert shins (by a hammer) properly into rods gap to let than firmly touch rods holders inner wall. As a matter of fact, whole inner wall of rods should be smooth.
1.4 Assembly of the cage:
      Put the groove side of rod the holder to face the machine body, and then insert round plates as per marks on them. Put lock nuts on to contact plates and then mount the upper case. Tighten bolts one by one.



Disassembly of the screw:

Rotate the handle as soon as machine stops and pull out the serew from thechamber, remove nuts and adjusting bolt.Insert a 16mm diameter bar into lock nut and turn it into clockwise.(important note:left hand screw).After taking off lock nut,each pait of pressing screw can be removed.However,holes in the screw might be blocked by fine slag particles,which retard the disassembly.Tapping or heatingpressing screw might help disassembling.


Mounting pressing screw:

Put small end of its shaft upwards,mount the first screw and then the second···sequence, tighten then by the lock nut to avoid particles in.On both ends of adjusting bolt, which isthese two bearings touch adjusting bolts double ends. Finally, whole pressing screw will be tightened by twoM42X2 nuts, But certainly, gaps of two bearings need to be carefully set. In fact, if hands can swing adjustingM42X2 nuts, But certainly, gaps of two bearings need to be carefully set. In fact, if hands can swing adjusting.

 

Machine Operation:

1 preparations before operating
1.1 12kg of lubricant needs to be filled into the gearbox.
1.2 After installing the machine, check whether lubricant has been filled in, bolts have been tightened, and handles are operable.
1.3 Check large pulley whether it is loose or blocked, repair it if necessary.
1.4 Adjust the tightness of the belt, switch on the motor and check its rotation direction.
1.5 Loosen the lock nut and tighten the screw to its end, then loose it for3-4circles and then tighten it again for half circle to assure the gap of the residue cake outlet.
2 Operating
 

2.1 Feeding must be steady and slow at the beginning to avoid blocking
2.2  In the case no cake is extrude outward,return  back the screw for 1-2circle .If there is still no cake is observed,machine needs to be shut down and checked ,However, in any case, operating the machine backward is absolutely prohibited  normally ,cake looks like tile but not sticky ;thickness is 1-2mm ,inner side is smooth ,out side creases and no oil the surface is allowed.
Cake thickness adjustment: Rotating the adjusting handle clockwise will make the cake thicker, otherwise will make it thinner. Each circle of adjustment (by adjustment bolt left hand T 165x6)will change the thickness 0.4-0.5mm.
2.3 When machine is operating, oil extruding and residue outlet need be checked
Frequently .Normally, most of oil will flow outward from square rods and several front round plates. Broken cake residue indicates the material is too dry; steam emerging from the cake residue indicates that it is too wet; In any case, water content in the raw material must be adjusted from time to time.
Slag slice emerging indicates too much water content and power-like slag low water content .Loose round plates will cause too much slag flowing outwards. However, adequate water content will cause slag flowing outwards from square rods; little slag from round plates is allowed. In a word, water content affects oil output rate, it needs adjusting properly.
3 stopping

3.1 Repeatedly move screw forwards and backwards for several times and let all material resided in the chamber goes out and adjust the cake to the possible thinnest, then stop the machine.
3.2 When machine stops caused by any accident, power supply must be shut down first, then rotate large pulley manually backwards, let the material return out. Then pull out the shaft and clean it. In the case the shaft could not be pulled out, remove the upper case and loose lock nut, separate round plates and clean them one by one.  

Failures and removal

NO Failures Reasons Removal
1 Sudden stop,
shaft blocked
1.New machine without running up.
2.Cake too thick, pressure too high.
1.Carefully operating as per the manual.
2.Note motor sound and current value
2 Low oil output
  1. Non-adequate water content.
  2. Low chamber temperature.
  3. Non-adequate gap among rods or plates.
  4. Parts worn.
1.Operating as per the manual.
2.Loosen tightening nut to drive slag off.
3.Replace worn parts.
3 Oil return to hopper
  1. Too tight rods and plates.
  2. high oil content and thicker cake.
1.Loosen tightening nut.
2.Adjust cake thickness and add cakes into chamber to drive oil off
4 Oil spot on cakes
  1. Too much water content .
  2. Too small gap among rods and plates.
  3. Parts worn
1.Operating as per the manual
2.Loose tightening nut.
3.Replace worn parts
5 Dark and viscous oil
  1. Low chamber temperature.
  2. Too much forming particles in oil .
  3. Raw material too dry.
1.Operating as per manual
2.Selecting raw material
6 Low productivity
  1. Poor quality of cotton seeds.
  2. Chamber and pressing screw not smooth.
  3. Raw material too much water content .
  4. Too much gap at oil outlet port.
  5. Worn screw
1.Cotton seeds selected.
2.Make chamber and screw and smooth.
3.operating as per manual
4.replace worn parts
7 Raw material
can be fed
  1. Oil returns to hopper.
  2. Wet raw material .
1.operating as per manual
2.cotton seeds prepared
8 Cracked residue
appears at the
outlet severely
  1. Gaps among rods and plates too big
  2. Too high pressure in the chamber.
  3. Parts worn.
  4. Raw material too dry.
1.operating as per manual
2.replace worn parts
 

Safety:

   Following items are strictly requested to be obeyed.
1 During operating, hands or metal rods are strictly prohibited to enter the hopper to touch cakes.
2 Tightening the screw shaft to its dead end is prohibited before starting or during operating, which might cause slag outlet to contact cake outlet ring, resulting in wearing.
In the case of storage, oil dirt on machines surface and slags on each part need to be taken off. Paint
rust-resisting grease and keep in dry place. Case needs to be covered to prevent dirty foreign particles from entering.
 

Company Profile

Henan Winglobal Machinery a fully integreated factory enterprise of design, manufacturing and sales of oil presses. It is designated by the former Ministry of Industrial Machinery as the recognised oil press manufacturing base, with 40 years history till now.

We are proud of our sophisticated equipment and rich technical expertise. Guided by the principle of "Dependable Quality, Reasonable Price, Timely Delivery, Considerate Aftersales", we have established firm and ever growing relationships with customers both at home and abroad.

We passed ISO in 2000, and in 2008 we achieved CE certificate. With our strength, our oil press products come with less energy consumption, and best oil yield rate. The oil press can be used to squeeze oil from all types of granular or powder oil seeds, including soybean, peanut, sunflower seeds, tung seeds, mustard seeds, castor seeds, palm fruit, palm kernel/fibre, coconut, rapeseeds, moringa etc.

Apart from the above, we also manufacture the combined automatic oil press, auxiliaries of all sorts, palm oil processing complete line, oil refinery set and so on.

Decent price, quick delivery, durable quality, we are honored to cooperate with your respectable business anytime!

 
Our Advantages



Wear-Resistant Oil Press Accessories Screw Shaft Rods Cake Outlet of Ring Bearing


Wear-Resistant Oil Press Accessories Screw Shaft Rods Cake Outlet of Ring Bearing
 

Why Choose Us
 

 

1.Low  investment                         2.Small  workspace                     

3.Long  life  usage   
                     4.Easy to install                       

5.Low  labor  cost                          6.Easy  to  operate                     

7.Higher output 
                            8.Can  process  multiple  oil  seeds       

 

     

Wear-Resistant Oil Press Accessories Screw Shaft Rods Cake Outlet of Ring Bearing

 

Frequently Asked Questions


Q: Can you help me choose the right product?
A:Sure.  We have many professional engineers.  They can help you choose the most suitable product according to your actual situation. 

Q: What about the price?
A: We are manufacturer's direct seller.  We pursue small profit and high turnover.  And we can offer you lower prices than other trading companies.  If the product is really suitable for you and helpful to you, we can negotiate the price.

Q: How about the quality of your products?
A: We put quality first and take integrity as our base.  Our machines are manufactured in strict accordance with national and international standards and we test each piece of equipment before delivery.  

Q: Are you a factory or a trading company?
A: We are a factory with 40 years of manufacturing experience. We also have our own trading company. The main products of the company are: screw oil press, oil filter, oil refining machine and spare parts.

Q: How can we confirm that you are a factory?
A: You can add our contact information and we will show you our factory online. Of course, you are welcome to visit the factory.

Q: What if I don't know how to operate this machine? What should I do?
A: Feel free to contact us and we'll tell you how to do it. And our machines have been tested before shipping and are fully assembled, you only need to run in 2-4 hours to be ready to work.

Q: What is cold pressing and hot pressing?
A: Cold pressing is the pressing of dried raw seeds. It usually takes two compressions to get the maximum amount of oil.
Hot pressing is the pressing of roasted seeds. Usually only 1 time to get the maximum oil. Roast peanuts to 125-130 degrees with 1-2% moisture. (We make seed roasters that are economical to heat with fuel.)


Q: What services do you offer?
A: (1)1 year free warranty, lifetime maintenance.
(2) Perennial supply of wearing parts.
(3) Provide technical solutions at any time.
(4) Provide installation video.


Q: How can you work with us?
A: For further details, please contact us immediately with an enquiry.



Contact us today for a list and a quote on the screw press you want!!!




 

 






 

 

 




 

 

 

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier